Key Factors For The Casting Process Of Fused Cast AZS

Casting is an important step of the manufacturing process that has great influence on the quality of the fused cast AZS block. Key factors that affect the casting process of fused cast AZS include the casting temperature, casting speed, the casting time and back pour.
The casting temperature is the temperature of the melt when it is poured into the mold. The casting temperature of fused cast AZS can be as high as 1820-1840℃. The viscosity of the melt is up to the chemical composition and temperature of the melt. The chemical composition is up to the formulation. The casting temperature is crucial since the higher the temperature, the lower the viscosity, the better the flow-ability. However, if the temperature is too high, the temperature difference between the casting and the mold is small, which will increase the shrinkage stress and cause cracks.
The casting speed determines the casting time. Every casting products has its best casting time. Improper casting time will cause many defects. If the casting speed is too fast, the stream will be coarse and the flowing speed will be too fast, which will produce big impact force on the mold. The force may destroy or melt the mold and cause protrusions. Additionally, gas will be brought into the mold and produce a thin shell filled with gas and bubbles in the casting. Besides gas, raw materials in the furnace mouth may be brought into the melt and cause defects. Conversely, if the casting speed is too slow, it will produce defects such as loose corners, knots, sand and pouring shortage.
Back pour refers to the process of repouring some melt into the shrinkage cavities after the casting is completed. Generally, small bricks are solidified quickly and do not require back pour. Medium bricks can be repoured. Large bricks require back pour and it takes a long time. Back pour is one of the effective ways to reduce the shrinkage cavities and improve the bulk density.
Zhengzhou Sunrise is a refractory material supplier from China, offering high quality refractory materials for glass furnaces, including fused cast AZS block, fused cast alumina block, fused cast high zirconia block, mullite brick, zircon brick, alumina bubble brick, magnesia brick, sillimanite brick, corundum brick, low porosity fireclay brick, high alumina brick, all kinds of glass furnace ramming masses, etc..